MEDESCAN L’il Booger Buster

Directions

Step 1: Ensure the L’il Booger Buster is fully charged. Select the appropriate nozzle based on your baby’s age: smaller for 0-6 months, larger for 6+ months. Attach the chosen nozzle securely to the device.
Step 2: Press the power button to turn on the L’il Booger Buster. The LED indicator will light up green, indicating the device is on the low power setting. If needed, press the “Suction Level” button to switch to high power (LED indicator will turn blue). Press again to return to low power.
Step 3: Press the LED button to cycle through different light colors if required. This can be helpful for better visibility, especially in low light conditions. Press the LED button again to stop cycling through the lights.
Step 4: Gently place the nozzle at the entrance of your baby’s nostril. Allow the device to gently suck out the mucus. Be careful not to insert the nozzle too far into the nostril. If the suction level is too high or if your baby is distressed, switch back to the low power setting.
Step 5: Once you have finished, turn the device off by pressing the power button. Remove the nozzle and waste tank. Clean the nozzle and tank thoroughly with warm water and a mild detergent or place them in the dishwasher if they are dishwasher safe.
Step 6: When the battery is low, the LED indicator will flash red twice and then the unit will power off. Recharge the device by plugging the supplied USB cable into the charging port and connecting it to a 5V power adapter (1A recommended).
Step 7: After the device and all components are dry, reassemble and store in a clean, dry place. Use the handy cap to cover the nozzles, ensuring they remain clean and ready for next use.